Installation Sheet

ManualsBrandsSonneman ManualsIndoor Ceiling FixturesSuspenders 18 Light 97" Wide LED Fixed Rail Ceiling Fixture

June 10, 2019

16 of 26

Luminaires and Luminaire Hangers

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Connecting a Monoline

Luminaire Hanger to a Power Bar:

1. Place the Monoline

Luminaire Hanger under the Power Bar.

2. Press up rmly on both sides the bottom of the Monoline

Luminaire Hanger, while pressing down on the top of the

Power Bar, until the Luminaire Hanger clicks into place (Fig. 1).

3. Press down rmly on top of the Luminaire Hanger Cap, while pressing up on the Luminaire Hanger, until the Luminaire

Hanger Cap clicks into place (Fig. 2).

4. To remove the Monoline

Luminaire Hanger Cover:

Spread the Monoline

Luminaire Hanger Cover apart using the thumbs and press up on the cover, while pressing down on

the Power Bar with the index and middle ngers. Tip the Monoline

Luminaire Hanger in the direction of the Power Bar

and press down on the Hanger, while pressing up on the Power Bar (Fig. 3).

Fig. 1

Fig. 3

Fig. 2

Connecting a Monoline

Luminaire to a Monoline

Pendant Cordset:

1. Install the included G4 Bulb. (Fig. 4)

2. Raise the Glass and align the holes in the glass to the holes in the Pendant Cordset (Fig. 5). Secure the glass by inserting

the Threaded Pins through the holes in the glass and screwing the pins into the Pendant Cordset (Fig. 6).

Fig. 4

Fig. 6

Fig. 5

G4 Bulb

Pendant

Cordset

Glass

Threaded Pins

CLICK!

1XB04CL09x 1XB04CL18x

Applies to Components:

1XDXXCL01x

1XDXXCL02x

1XDXXCL03x

Applies to Components:

Power

Bar

Luminaire

Hanger Cap

Luminaire

Hanger