Installation & Assembly

ManualsBrandsSonneman ManualsLighting2-Light LED Outdoor Bulkhead Light

2 of 2

January 2, 2018

Assembly Instructions 2850, 2852, 2853, 2854, 2855

INSTRUCTIONS D’INSTALLATION

Votives Series - LED Sconce, 1' LED Wall Bar, 4' LED Wall Bar, 6' LED Wall, 8' LED Wall

Important

• Always disconnect the power before installing and before cleaning or other maintenance.

• Consult a qualiﬁed, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualiﬁé pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut o power to the outlet box.

2. The LED driver (A) must be installed in a remote and accessible location near the xture in accordance with local electrical

code. (Fig. 1)

a. Connect the LED driver’s live wire (black) to the live supply wire.

b. Connect the LED driver’s neutral wire (white) to the neutral supply wire.

c. Connect the LED driver's positive (+) output wire (red) to the necessary length of red wire (not included) to reach the

xture location.

d. Connect the LED driver's negative (-) output wire (black) to the necessary length of black wire (not included) to reach the

xture (B) location.

3. Drill a small hole (C) in the wall behind the xture and pull the low voltage wires through the wall.

4. Attach the mounting plate (D) to the structure, secure with drywall screws (E)

and drywall anchors (F).

5. Make appropriate electrical connections using wire nuts:

a. Connect the positive (red) low voltage wire to the red xture wire.

b. Connect the negative (black) low voltage wire to the black

xture wire.

c. Carefully place the connections in the back of the xture (B).

6. Install the xture (B) to the mounting plate (D) by

hooking the bar in the xture onto

the upper bend on the mounting plate (D).

Secure with set screws (G)

using included Allen key (H).

7. Screw diusers (J) into the xture (B).

8. Restore power to the outlet box (A).

Note

• 2850, 2852 & 2853: These ﬁxtures are dimmable with Electronic Low Voltage (Trailing-Edge) type dimmers and

Incandescent (Leading-Edge) type dimmers. For best performance, we recommend using an Electronic

Low Voltage Dimmer.

• 2854 & 2855: This ﬁxture is dimmable with ELV (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type

dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the ﬁnish, avoid any harsh abrasives or chemicals.

Fig. 1

2853

2850

2852

2853

2854

2855