Installation & Assembly

November 24, 2015

2 of 2

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

L'arc Series- Petite LED Sconce, Grand LED Sconce

Sword Series - 24" LED Sconce

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut o power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver's (B) live wire (black) to the live outlet box wire.

b. Connect the LED driver's (B) neutral wire (white) to the neutral outlet box wire.

c. Connect the xture's ground wire (green or uncoated) to the ground outlet box wire. If no ground is present in outlet box, connect

xture's ground wire to the mounting plate (C) using the green screw (included).

d. Carefully place connections and LED driver (B) in outlet box (A).

3. Attach the mounting plate (C) to the outlet box (A), secure with outlet box screws (D).

For Wet Location Use: Fixture must be installed in the orientation shown, and mounted minimum 4' above the ground.

4. Install the back plate (E) to the mounting plate (C) by hooking the bend (F) onto the bar on the back plate. Secure with mounting screw (G)

using included Allen wrench (H).

5. For Wet Location Use: Place a small bead of silicone or water proof caulk (not included) around the back plate (E) where it comes into

contact with the wall.

6. Restore power to the xture.

Note

• This fixture is dimmable with Electronic Low Voltage (Trailing-Edge) and Incandescent (Leading-Edge) type

dimmers. For best performance, we recommend using an Electronic Low Voltage dimmer.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

7240, 7243, 7245

7240

7245

7243