Installation & Assembly

Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

Assembly Instructions for item : 2210, 2250

Wands Series - 1-Arm LED Sconce,

Champagne Wands - 1-Arm LED Sconce

This light should be installed by a licensed electrician

LAMP INSTALLATION AND ASSEMBLY

1. Shut off power to the outlet box. (ﬁg. A)

2. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s live wire (brown/black) to the live outlet box wire.

b. Connect the LED driver’s neutral wire (blue/white) to the neutral outlet box wire.

c. Connect ﬁxture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect ﬁxture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections in outlet box.

3. Attach the mounting plate to the outlet box, secure with outlet box screws.

4. Attach the back plate to the mounting plate, secure with mounting screws.

5. Restore power to the ﬁxture.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the ﬁnish,

avoid any harsh abrasives or chemicals.

Note: This fixture is not dimmable. Do NOT use with dimmer switch.

2210: Fingerprints on the acrylic can be removed with rubbing alcohol.

outlet box

back plate

mounting plate

outlet box screw

mounting screw

LED driver