Installation Sheet

March 09, 2016

6 of 29

1. Shut off power to the outlet box.

2. Assemble the Power Feed (A) as shown on page 17.

3. Connect the Power Feed Hangers (B) to the Power Feed (A) as shown on page 25.

4. Connect the first-tier Linear Power Bar (C) to the Power Feed Hanger (B) as shown on page 25.

5. Connect the second-tier Linear Power Bar (D) to the first-tier Linear Power Bar (C) using the Parallel Power Bar Hangers (E)

as shown on page 28. (Fig. 1-2)

6. Connect the Luminaire Hangers (F) to the second-tier Linear Power Bar (D) as shown on page 29. (Fig. 3)

7. Connect the Luminaires (G) to the Luminaire Hangers (F) as shown on page 29. (Figs. 1-2)

8. Restore power to the outlet box.

Suspenders™ - 2-Tier Linear Conguration

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.