Installation Sheet

March 09, 2016

29 of 29

Luminaire and Luminaire Hanger Installation

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Connecting an RPxx Luminaire to a Luminaire Hanger (Fig. 1):

1. Gently insert the two Luminaire Hanger rods into the holes on the top of the Luminaire.

2. Rotate the Luminaire or Luminaire Hanger 90 degrees.

3. Push the Luminaire Hanger rods into the Luminaire until the copper on the ends of the rods is no longer visible.

4. Rotate the Luminaire or Luminaire Hanger back 90 degrees to lock.

Connecting an HCxx Luminaire to a Cluster Luminaire Hanger (Fig. 2):

1. Insert the two rods of the Cluster Luminaire Hanger and the bottom Luminaire into the center hub.

2. Use the included Allen wrench to tighten the four set screws.

Connecting a Luminaire Hanger to a Power Bar (Fig. 3):

1. Place the Luminaire Hanger over the Power Bar.

2. Press down rmly on the top of the Luminaire Hanger, while pressing up on the bottom of the Power Bar, until the

Luminaire Hanger clicks into place.

CLICK!

Fig. 1

Fig. 2Fig. 3