Installation Sheet

March 09, 2016

27 of 29

Power Bar Assembly

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Tri-Bar Power Bar Assembly:

1. Insert one of the arms onto the center hub, and

secure with the four (4) Phillips screws. (Fig. 1)

2. Repeat with the other arm. (Fig. 2)

Linear Power Bar Assembly:

1. The Linear Power Bar comes with a spacer clip pre-installed at the center of the Power Bar. (Fig. 2)

2. If desired, the spacer clip can be removed using a Phillips screwdriver. (Fig. 4)

Fig. 1

Fig. 3

Fig. 4

Fig. 2