Installation Sheet

March 09, 2016

24 of 29

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the transformer's (B) live wire (black) to the live outlet box wire.

b. Connect the transformer's (B) neutral wire (white) to the neutral outlet box wire.

c. Connect the ground wire (green or uncoated) to the ground outlet box wire.

d. Carefully place connections and transformer (B) in outlet box (A).

3. Attach the mounting plate (C) to the outlet box (A), secure with outlet box screws (D) so that the studs (E) are horizontal.

4. Install the Power Feed (F) to the mounting plate (C) by passing the studs (E) through the holes on the Power Feed, secure

with the cap nuts (G).

Bar Sconce Power Feed Installation

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.