Installation Sheet

March 09, 2016

23 of 29

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the transformer's (B) live wire (black) to the live outlet box wire.

b. Connect the transformer's (B) neutral wire (white) to the neutral outlet box wire.

c. Connect the ground wire (green or uncoated) to the ground outlet box wire.

d. Carefully place connections and transformer (B) in outlet box (A).

3. Attach the mounting plate (C) to the outlet box (A), secure with outlet box screws (D).

4. Install the Power Feed (E) to the mounting plate (C) by hooking the bend (F) onto the bracket in the Power Feed. Secure with

set screws (G) using included Allen wrench (H).

Standard Wall Power Feed Installation

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.