Installation Sheet

March 09, 2016

20 of 29

Minibox Ceiling Power Feed Installation

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

12. Feed the Minibox into the wall opening at a slight angle (Fig. 3) until the side tabs (H) are pressed against the mounting

surface. (Fig. 3)

13. While keeping the side tabs (H) pressed against the mounting surface, secure the Minibox to the mounting surface by

tightening the two mounting screws (G). (Fig. 4)

14. Make appropriate electrical connections using wire nuts: Connect one of the black Power Feed wires to one of the

transformer output wires. Connect the other black Power Feed wire to the second transformer output wire. Carefully place

connections in the Minibox. (Fig. 5)

15. Attach mounting bracket (J) to Minibox with two mounting screws (K). (Fig. 5)

16. Attach Power Feed (L) to mounting bracket (J). Secure using set screw (M) and included Allen key (N). (Fig. 6)

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.

Fig. 3

Fig. 5 Fig. 6

Fig. 4