Installation Sheet

March 09, 2016

15 of 29

1. Shut off power to the outlet box.

2. Assemble the Power Feed (A) as shown on page 24.

3. Connect the Luminaire Hangers (B) the Power Bar (C) as shown on page 29. (Fig. 3)

4. Connect the Luminaires (D) to the Luminaire Hangers (B) as shown on page 29. (Figs. 1-2)

5. Restore power to the outlet box.

Suspenders™ - Bar Sconce Conguration

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.