Installation Sheet

March 09, 2016

13 of 29

1. Shut off power to the branch circuit conductor.

2. Assemble the Power Feed (A) as shown on page 21.

3. Connect the Luminaire (B) to the Luminaire Hanger (C) as shown on page 29. (Figs. 1-2)

4. Connect the Luminaire Hanger (C) the Power Bar (D) as shown on page 29. (Fig. 3)

5. Restore power to the branch circuit conductor.

Suspenders™ - Mini Single Sconce Conguration

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.