Installation Sheet

March 09, 2016
©2016 SONNEMAN - A Way of Light
9 of 29
A
G
J
Suspenders™ - Oset Linear Conguration
Assembly Instructions
INSTRUCTIONS D’INSTALLATION
Important
• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.
Note
• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.
I
B
D
C
H
K
F
E
1. Shut off power to the outlet box.
2. Assemble the Power Feed (A) as shown on page 17.
3. Connect one of the upper Linear Power Bars (B) to the Power Feed (A) on one end using the Power Feed Hangers (C) as
shown on page 25, and to the ceiling on the other end using the Ceiling Hanger (D) as shown on page 26.
4. Connect the other upper Linear Power Bar(s) (E) to the ceiling in line with the first using the Ceiling Hangers (D)
as shown on page 26.
5. Connect the lower Linear Power Bar(s) (F, G) to the upper Linear Power Bars (B, E) using the Parallel Power Bar Hangers (H)
as shown on page 28. (Fig. 1-2). 4-Bar Configuration Only: Connect the free end of the last lower Linear Power Bar (G) to
the ceiling using the Cable Ceiling Hanger (I) as shown on page 26.
6. Connect the Luminaire Hangers (J) to the Linear Power Bars (B, E, F, G) as shown on page 29. (Fig. 3)
7. Connect the Luminaires (K) to the Luminaire Hangers (J) as shown on page 29. (Figs. 1-2)
Single/Cluster Combo Suggested Installation:
24" - Upper Linear Power Bars (B,E): Hang 2pcs Single Luminaire and 1pc Cluster Luminaire in an alternating pattern.
Lower Linear Power Bars (F,G): Hang 1pc Single Luminaire and 2pcs Cluster Luminaire in an alternating pattern.
36" - Upper Linear Power Bars (B,E): Hang 1pc Single Luminaire and 2pcs Cluster Luminaire in an alternating pattern.
Lower Linear Power Bars (F,G): Hang 2pcs Single Luminaire and 1pc Cluster Luminaire in an alternating pattern.
48" - All Linear Power Bars (B,E,F,G): Hang 2pcs Single Luminaire and 2pcs Cluster Luminaire in an alternating pattern.
8. Restore power to the outlet box.