Installation Sheet

March 09, 2016

8 of 29

1. Shut off power to the outlet box.

2. Assemble the Power Feed (A) as shown on page 17.

3. Connect the second-tier Linear Power Bars (B) to the first-tier Linear Power Bars (C) using the Perpendicular Power Bar Hangers (D)

as shown on page 28. (Fig. 3-5)

4. Connect the Ceiling Hangers (E) to the first-tier Linear Power Bars (C) and install in the ceiling as shown on page 26.

5. Connect the center second-tier Linear Power Bar (B) to the Power Feed (A) using the Cord Power Feed Hangers (F)

as shown on page 25.

6. Connect the Luminaire Hangers (G) to the Linear Power Bars (B, C) as shown on page 29. (Fig. 3)

Single Luminaire Suggested Installation:

36" - Hang 1pc Luminaire Hanger (G) from the first-tier Linear Power Bars (C) between each second-tier Linear Power Bar (B).

Hang 5pcs Luminaire Hangers (G) from each of the second-tier Linear Power Bars (B).

48" - Hang 2pcs Luminaire Hangers (G) from the first-tier Linear Power Bars (C) between each second-tier Linear Power

Bar (B). Hang 6pcs Luminaire Hangers (G) from each of the second-tier Linear Power Bars (B).

7. Connect the Luminaires (H) to the Luminaire Hangers (G) as shown on page 29. (Figs. 1-2)

Single/Cluster Combo Suggested Installation:

Hang 1pc Cluster Luminaire from the first-tier Linear Power Bars (C) between each second-tier Linear Power Bar (B).

36" - Outer Second-Tier Linear Power Bars (B): Hang 3pcs Cluster Luminaire and 2pcs Single Luminaire in an

alternating pattern.

Middle Second-Tier Linear Power Bar (B): Hang 2pcs Cluster Luminaire and 3pcs Single Luminaire in an

alternating pattern.

48" - All Second-Tier Linear Power Bars (B): Hang 3pcs Cluster Luminaire and 2pcs Single Luminaire in an alternating pattern.

8. Restore power to the outlet box.

Suspenders™ - 2-Tier Grid Conguration

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.