Installation Sheet

June 10, 2019

26 of 26

1. Shut off power to the outlet box.

2. Assemble the Power Feed as shown on page 25.

3. Connect one of the Upper Power Bars to the Power Feed on one end using the Power Feed Hangers as shown on page 3,

and to the ceiling on the other end using the Ceiling Hanger as shown on page 5-6.

4. Connect the other Upper Power Bar(s) to the ceiling offset and parallel to the first using the Ceiling Hangers

as shown on page 5-6.

5. Connect the Lower Power Bar(s) to the Upper Power Bars using the Perpendicular Power Bar Hangers. 4-Bar Configu-

ration Only: Connect the free end of the Last Lower Power Bar to the ceiling using the Cable Ceiling Hanger as shown on

page 9-10.

6. Connect the Luminaire Hangers to the Power Bars as shown on pages 13-21.

7. Connect the Luminaires to the Luminaire Hangers as shown on pages 13-21.

8. Restore power to the outlet box.

Power Feed

Last lower Power Bar

Suspenders

- Zig-Zag Configuration

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing components and before cleaning or other

maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualiﬁé pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.

Cable Ceiling Hanger

Upper Power Bar

Ceiling Hanger

Power Feed

Hanger

Perpendicular

Power Bar Hanger

Lower Power Bar

Upper Power Bar

Luminaire Hanger

Luminaire