Installation Sheet

March 09, 2016

3 of 29

1. Shut off power to the outlet box.

2. Assemble the Power Feed (A) as shown on page 17

3. Assemble the Tri-Bar Power Bar (B) as shown on page 27. (Figs.1-2)

4. Connect the Power Feed Hangers (C) to the Tri-Bar Power Bar (B) so they are aligned with the lines on top of the Power Bar.

5. Connect the Power Feed Hangers (C) to the Power Feed (A) as shown on page 25.

6. Connect the Luminaire Hangers (D) to the Luminaires (E) as shown on page 29. (Figs. 1-2)

7. Connect the Luminaire Hangers (D) to the Tri-Bar Power Bar (B) as shown on page 29. (Fig. 3)

8. Restore power to the outlet box.

Suspenders™ - 1-Tier Tri-Bar Conguration

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.