Installation & Assembly

2 of 2

December 27, 2017

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Planes Series - LED Sconce, 24" LED Double Sconce, 32" LED Double Sconce, 40" LED Double Sconce

Important

• Always disconnect the power before installing and before cleaning or other maintenance.

• Consult a qualiﬁed, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualiﬁé pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• The outlet box must be at least 4” DIA and 1.5” deep to ﬁt the LED driver.

• This ﬁxture is dimmable with Electronic Low Voltage (Trailing-Edge) type and Incandescent (Leading-Edge) type

dimmers. For best performance, we recommend using an Electronic Low Voltage dimmer.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the ﬁnish, avoid any harsh abrasives or chemicals.

2680, 2682, 2683, 2684

2684

2680

2683 2682

1. Shut o power to the outlet box (A).

2. Make appropriate electrical connections using

wire nuts:

a. Connect the LED driver’s (B) live wire (black) to

the live outlet box wire.

b. Connect the LED driver’s neutral wire (white) to

the neutral outlet box wire.

c. Connect the xture’s ground wire (green or

uncoated) to the ground outlet box wire. If no

ground is present in outlet box, connect xture’s

ground wire to the mounting plate (D) using the

green screw (included).

d. Carefully place connections and LED driver in

outlet box.

3. Attach the mounting plate (D) to the outlet box (A),

secure with outlet box screws (E).

4. Install the xture (C) to the mounting plate (D) by

hooking the bar in the xture onto the upper

bend on the mounting plate. Secure with

set screws (F) using included Allen key (G).

5. Restore power to the xture.