Assembly Instructions

2 of 2

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the transformer’s (B) live wire (black) to the

live outlet box wire.

b. Connect the transformer’s (B) neutral wire (white) to

the neutral outlet box wire.

c. Connect the xture’s ground wire (green or uncoat

ed) to the ground outlet box wire. If not ground is

present in outlet box, connect xture’s ground wire

to the mounting plate (C) using the green screw

(included).

d. Carefully place connections and transformer (B) in

outlet box (A).

3. Attach the mounting plate (C) to the outlet box (A),

secure with outlet box screws (D). Use anchors (E) and

screws (F) to secure the ends of mounting plate to

mounting surface.

4. Install the xture (G) to the mounting plate (C).

Secure with mounting set screws (H) using included

Allen wrench (J).

5. Restore power to the xture.

Note

• The outlet box must be at least 4” DIA and 1.5” deep to t the LED driver.

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

INSTRUCTIONS D’INSTALLATION

18" LED Bath Bar, 24" LED Bath Bar, 32" LED Bath Bar, 40" LED Bath Bar