Installation Sheet

2 of 2

October 31, 2019

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Marue Series- 7" Round Surface Mount, 10" Round Surface Mount, 14" Round Surface Mount

7" Square Surface Mount, 10" Square Surface Mount, 14" Square Surface Mount

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Attach the ceiling plate (C) to the outlet box (A), secure with

outlet box screws (D).

3. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (B) live wire (black) to the live outlet

box wire.

b. Connect the LED driver’s (B) neutral wire (white) to the neutral

outlet box wire.

c. Connect the xture’s ground wire (green or uncoated) to

the ground outlet box wire. If no ground is present in outlet

box, connect xture’s ground wire to the ceiling plate (C)

using the green screw (included).

d. Carefully place connections in outlet box (A).

4. Install xture (E) to ceiling plate (C) with xture screws (F)

5. Restore power to the xture.

Note

• This xture is compatible with Electronic Low Voltage (Trailing-Edge), Incandescent (leading-Edge), and 0-10V type

dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

7420, 7421, 7422

7425, 7426, 7427

7420 7421

7422

7425 7426 7427