Installation Guide

assembly nut
high-low switch
base
lower stem
upper
stem
socket tube
socket
power cord
bulb
glass shield
glass shade
shade holder
FIG. A
Assembly Instructions for: item 7098
Lina series - Table Lamp
clutch
assembly nut
explosion barrier
/U.V. shield
- etched
shade holder
Assembly for customer
assembled
stem
base cover
and loader
assembly nut
upper
stem
clutch
Important: Always unplug the power cord before installing or replacing bulb and before cleaning or other maintenance.
LAMP ASSEMBLY
1. Place stem into base and secure with two hex nuts.
2. Place shade on shade support.
3. Place perforated diffuser on shade and secure with finial.
4. Place acrylic diffsuer under acrylic diffuser support stem and secure with
diffuser ring.
finial
shade
perforated diffuser
stem
hex nuts
base
shade support stem
hex key
acrylic diffuser
diffuser ring
acrylic diffuser support stem
pull swtich
©2006 Sonneman - A Way of Light