Installation Sheet

2 of 2

November 14, 2019

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Zoom Series- LED Surface Mount

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (B) live wire (black) to the live

outlet box wire.

b. Connect the LED driver’s (B) neutral wire (white) to the

neutral outlet box wire.

c. Connect the xture’s ground wire (green or uncoated) to

the ground outlet box wire.

d. Connect low voltage output wires from LED driver to wires

from light xture: red to red and black to black.

e. Carefully place connections and LED driver in outlet box (A).

3. Attach the xture (C) to the outlet box (A), secure with outlet

box screws (D).

4. Snap face (E) on to xture (C) and align as desired

5. Restore power to the xture.

Note

• The outlet box must be at least 4” DIA and 1.5” deep to t the LED driver.

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type and Incandescent (Leading-Edge) type

dimmers. For best performace, we recommend using an Electronic Low Voltage dimmer.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

3740