Installation & Assembly

2 of 2

November 14, 2019

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Torc Series - LED Pendant, LED Double Pendant, LED Triple Pendant

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut o power to the outlet box (A).

2. Determine height at which the pendant is to be hung. Use the

screwdriver to loosen the slotted set screw (B). Adjust height of cord.

Tighten the set screw to set. Reserve extra cord in the canopy (C).

3. Make appropriate electrical connections using wire nuts (Appendix A):

a. Connect the LED driver’s (D) live wire (black) to the live outlet box wire.

b. Connect the LED driver’s (D) neutral wire (white) to the neutral outlet

box wire.

c. Connect the canopy's ground wire (green or uncoated) to the ground

outlet box wire. If no ground is present in outlet box, connect canopy's

ground wire to the mounting plate (E) using the green screw (included).

d. Connect the xture inner conductor to the red driver output wire and

connect the xture outer conductor to the black driver output wire.

e. Carefully place connections and LED driver in outlet box

(For 3152 and 3153- Place connections and LED driver in canopy.

4. Attach the mounting plate (E) to the outlet box (A), secure with outlet box

screws (F).

5. Attach canopy (C) to the mounting plate (E), secure with canopy screws (G).

6. Restore power to the outlet box (A).

Note

• The outlet box must be at least 4” DIA and 1.5” deep to t the LED driver.

• 3151- This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type dimmers and Incandescent (Leading-

Edge) type dimmers.

• 3152, 3153- These xtures are dimmable with Electronic Low Voltage (Trailing-Edge), Incandescent (Leading-Edge),

and 0-10V type dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

3151, 3152, 3153

3153

3151

3152