Installation Sheet

1. Shut oﬀ power to the outlet box. (A)

2. Make appropriate electrical connections using wire nuts:

a. Connect the transformer's (B) live wire (black) to the live outlet box wire.

b. Connect the transformer’s neutral wire (white) to the neutral outlet box wire.

c. Connect xture’s ground wire (green or uncoated) to the ground outlet box wire.

d. Carefully place connections and transformer (B) in outlet box (A).

3. Attach the canopy (C) to the outlet box (A), secure with outlet box screws (D).

4. Install the xture (E) to the canopy (C) by inserting the tab (F) into the slot (G)

on the canopy (Fig. 1) and secure with the round head screw (H).

5. Restore power to the xture.

January 23, 2015

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Dazzle Series - 6" Square LED Surface Mount, 10" Square LED Surface Mount

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

2568, 2569

Note

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

Fig. 1

2568

2569

Continued 2 of 2