Installation Sheet

February 21, 2019

4 of 5

Fig. 4

16½”

25¼”

17¼”

4. Referencing layout from step 2, use the xture (A) and mounting brackets (J) as a template to mark the three locations for the

mounting screws (K). Mark one location designated for the input wire hole (L). If applicable, mark the location(s) designated for

the output wire hole(s) (L). Drill mounting and wire holes in the wall at marked locations.

5. Route remaining cable out of the arm and through the wire hole (L) on the mounting bracket (J) (Fig. 5).

Fig. 5