Installation Sheet

Notch direction
C1
C2
C2
H6
Detailed View
Notch
Notch
Neck without
notch
Arm Length Key
C2
Hub Key
H6
12¼" (5)
5x
December 16, 2019
©2019 SONNEMAN - A Way of Light
4 of 13
Step 2
a. Take one of the completed H5 Hubs and attach H6 Hubs onto the end of each arm using one of the necks without a notch.
b. Connect the H6 Hubs using C2 Arms as shown in Fig. 4.
Note: Make sure the notches on the H6 Hubs are facing each other and not the H5 Hub (see Detailed View).
c. Fig. 5 shows this step in the context of the assembly as a whole.
IMPORTANT:
Be sure to install all
M2 Set Screws to secure
the Arms to the Hubs,
as shown on page 5.
Fig. 4
Fig. 5