Installation Sheet
November 20, 2018
©2018 SONNEMAN - A Way of Light
3 of 12
power supply
power feed
hanger/stay
clips
Power Feed - Contains the power feed for attaching the conguration to the outlet box and connecting to the power
supply. Also includes a parts bag necessary for installation.
Power Supply - Contains the LED Driver necessary for connecting to the branch circuit and housed in an enclosure for
remote installation.
Triple Ceiling Hanger/Hanger Clips - Contains the cable ceiling hanger and stay clips as well as a parts bag
necessary for conguration assembly.
Welcome to Constellation™
A Constellation conguration is built from LED hubs, connecting arms, end arms, and cable ceiling hangers. Illumination
radiates through either the white optical acrylic lenses, or sparkles with refracted light through micro-faceted clear acrylic
crystal lenses. Each hub is a complete LED light engine, using an array of LEDs with driver circuitry on each of the two faces
of the hub. The connecting arms form a structural and electrical connection between the hubs, and are easily assembled by
inserting the arm into the hub and are secured in place by a retaining set screw. The hubs can revolve around the connecting
arms to alter the orientation of the illumination and that of the intersecting connecting arms. The conguration is supported
by cable ceiling hangers that slide onto an arm and lock into place as needed, and is powered by a special power feed hub
connected to the ceiling power feed.
Hang Clip
(1)
Canopy Set
Screw
(2)
Power Feed
(1)
Stay Clips
(2)
Small Hex
Wrench
(3+)
Medium Hex
Wrench
(1)
Screwdriver
(1)
Remote Power Supply
(1)
Large Hex
Wrench
(1)
WHAT COMES IN THE BOX