Installation Sheet

November 20, 2018

2 of 12

Constellation™ Product Information and Warnings

Important

• Always disconnect the power before installing or replacing Luminaires and before cleaning or

other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualiﬁé pour vous assurer que les conducteurs de la dérivation sont adéquats.

• Please read all included assembly instructions and warnings carefully before installation. Contact Customer

Service if you have any questions or concerns. Before installation, please conrm that the xture is compatible

with your supply voltage and dimming system, if present.

• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory sealed

compartments, and avoid touching the LEDs with your hands or any object.

• Although all our xtures are equipped with protective devices, LED electronic systems are vulnerable to power

surges and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC

systems.

• Remote LED Driver installation must be done by a licensed electrician and in accordance with local building and

electrical codes. Remote installations should be in an accessible location, as close to the xture as possible. The

appropriate wire gauge must be used to limit the voltage drop to avoid overloading the LED Driver.

• Any mounting hardware is provided for your convenience and should be used with discretion. Always use the

appropriate hardware for the mounting surface.

• Constellation™ LED Drivers are 24VDC Constant Voltage output, and are dimmable with 0-10V dimmers ONLY.

• Constellation™ must be installed in dry locations ONLY.