Installation Sheet
November 20, 2018
©2018 SONNEMAN - A Way of Light
11 of 12
E3
E1
E2
E4
E5
Fig. 7
ADDING THE END ARMS (Section 4)
a. Build this section using the End Arms from the Section 4 box.
b. Refer to the illustration below (Fig. 7) to secure each of the End Arms, there is no specic order for installing these.
2½" (7)
4½" (6)
6½" (4)
8½" (1)
10½" (1)
Arm Length Key
E1
E2
E4
E3
E5
IMPORTANT:
Be sure to install all
M2 Set Screws to secure
the Arms to the Hubs,
as shown on page 6.