Installation & Assembly

2 of 2

October 31, 2019

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Mezza Cupola Series- 5" Downlight LED Sconce, 5" LED Sconce,

8" Downlight LED Sconce, 8" LED Sconce

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (B) live wire (black) to the live outlet box wire.

b. Connect the LED driver’s (B) neutral wire (white) to the neutral outlet box wire.

c. Connect the xture’s ground wire (green or uncoated) to the ground outlet box wire. If no ground is present in

outlet box, connect xture’s ground wire to the mounting plate (C) using the green screw (included).

d. Connect low voltage output wires from LED driver to wires from light xture: red to red and black to black.

e. Carefully place connections and LED driver in outlet box (A).

3. Attach the mounting plate (C) to the outlet box (A), secure with outlet box screws (D). Fixture must be installed in the

orientation shown.

4. Align body (E) on to moutning plate (C) and secure in place with set screw (F) using the included Allen wrench.

For Wet Location use: Fixture must be installed in the orientation shown and mounted a minimum of 4' above the

ground. Place a small bead of silicone or waterproof caulk (not included) around the perimeter

of the xture (E) where it comes into contact with the wall.

5. Restore power to the xture.

Note

• The outlet box must be at least 4” DIA and 1.5” deep to t the LED driver.

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type and Incandescent (Leading-Edge) type

dimmers. For best performace, we recommend using an Electronic Low Voltage dimmer.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

7470, 7471, 7472, 7473

7472

7470 7471

7473