Installation & Assembly

2 of 2

November 13, 2019

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Meclisse Series - LED Sconce

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (B) live wire (black) to the live outlet box wire.

b. Connect the LED driver’s (B) neutral wire (white) to the neutral outlet box wire.

c. Connect the xture’s ground wire (green or uncoated) to the ground outlet box wire. If no ground is present in

outlet box, connect xture’s ground wire to the mounting plate (C) using the green screw (included).

d. Connect low voltage output wires from LED driver to wires from light xture: red to red and black to black.

e. Carefully place connections and LED driver in outlet box (A).

3. Attach the mounting plate (C) to the outlet box (A), secure with outlet box screws (D). Fixture must be installed in the

orientation shown.

4. Align body (E) onto mounting plate (C) and secure in place with set screw (F) using the included Allen wrench.

5. Restore power to the xture.

Note

• The outlet box must be at least 4” DIA and 1.5” deep to t the LED driver.

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type and Incandescent (Leading-Edge) type

dimmers. For best performace, we recommend using an Electronic Low Voltage dimmer.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

3110