Installation & Assembly

Detail View
3702
2 of 2
©2019 SONNEMAN - A WAY OF LIGHT
November 14, 2019
A
F
B
C
G
D
E
Assembly Instructions
INSTRUCTIONS D’INSTALLATION
Vuoto Series - 10in and 15in LED Sconce
Important
Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.
1. Shut off power to the outlet box (A).
2. Make appropriate electrical connections using wire nuts:
a. Connect the LED driver’s (B) live wire (black) to the live outlet box wire.
b. Connect the LED drivers (B) neutral wire (white) to the neutral outlet box wire.
c. Connect the xture’s ground wire (green or uncoated) to the ground outlet box wire. If no ground is present in
outlet box, connect xture’s ground wire to the mounting plate using the green screw (included).
d. Carefully place connections and LED driver (B) in outlet box (A).
3. Attach the mounting plate (C) to the outlet box (A), secure with outlet box screws (D).
4. Attach the xture (E) to the mounting plate (C) using brackets (F), secure with mounting screws (G) (see Detail View).
5. Restore power to the xture.
3701
3701, 3702
Note
The outlet box must be at least 4” DIA and 1.5” deep to t the LED driver.
This xture is dimmable with ELV (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type dimmers only.
Care Instructions
Dusting: Use a clean, dry cloth.
Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.