Installation & Assembly

Detail View

2 of 2

November 14, 2019

Note

• This xture is dimmable with ELV (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Vuoto Series - 20in LED Sconce

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Attach the mounting plate (B) to the outlet box (A), secure with outlet box screws (C).

3. Secure mounting plate to wall using drywall screws (D) through the slots (E) on mounting plate.

4. Attach strain relief nial (F) on xture to stud (G) on mounting plate.

5. Make appropriate electrical connections using wire nuts:

a. Connect the xture's live wire (black) to the live outlet box wire.

b. Connect the xture's neutral wire (white) to the neutral outlet box wire.

c. Connect the xture’s ground wire (green or uncoated) to the ground outlet box wire. If no ground is present in

outlet box, connect xture’s ground wire to the mounting plate using the green screw (included).

d. Carefully place connections in outlet box (A).

6. Attach the xture (H) to the mounting plate (B) using brackets (J), secure with mounting screws (K) (see Detail View).

7. Restore power to the xture.

3703