Installation & Assembly

©2019 SONNEMAN - A WAY OF LIGHT
2 of 3
January 23, 2020
Assembly Instructions
INSTRUCTIONS D’INSTALLATION
Sabon Series - LED Sconce, LED Double Sconce, LED Triple Sconce
Important
Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.
1. Shut o power to the outlet box.
2. The LED driver (A) must be installed in a remote and accessible location near the xture in accordance with local electrical
code (Fig. 1).
a. Connect the LED driver’s live wire (black) to the live supply wire.
b. Connect the LED drivers neutral wire (white) to the neutral supply wire.
c. Connect the LED driver's positive (+) output wire to the necessary length of red wire (not included) to reach the xture
(B) location.
d. Connect the LED driver's negative (-) output wire to the necessary length of black wire (not included) to reach the
xture location.
3. Drill a 1/4" hole (C) in the wall behind the xture (B) and pull the low voltage wires through the wall.
4. Using mounting plate (D) as template, mark locations for mounting screw (E) holes.
5. Pull wires through middle of mounting plate (D) and install using anchors (F) and mounting screws (E). Do not tighten
screws completely.
6. Make appropriate electrical connections using wire nuts:
a. Connect the positive (+) low voltage wire to the red xture wire.
b. Connect the negative (-) low voltage wire to the black xture wire.
7. Attach backplate (G) to the mounting plate (D), secure with set screws (H)
using the included Allen wrench.
8. Attach globes (K) as instructed on following page.
9. Restore power to the outlet box.
Note
This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type dimmers and Incandescent (Leading-Edge)
type dimmers. For best performance, we recommend using an Electronic Low Voltage Dimmer.
Care Instructions
Dusting: Use a clean, dry cloth.
Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.
2060, 2062, 2063
A
D
C
E
F
B
20632062
2060
Fig. 1
G
H