Operating Instructions English
Content Scope of Supply.....................21 Safety Instructions.................22 Assembly..............................24 Startup................................27 Operation.............................29 Device Shutdown...................30 1 Switchbox with switches for LED light and discharge chute control 2 Safety bar 3 LED light 4 Battery compartment 1 5 Discharge chute with adjustment 6 Rotor 7 Scraper blade 2 3 Battery removal.....................30 4 Battery Care.........................
Scope of Supply Packaging content – After opening the packaging check the completeness of the supplied components! 1x Congratulations on the purchase of your Sonneck SNOWMASTER product! Read the user manual carefully and familiarize yourself with the operating elements and the use of the de vice. The user is responsible for accidents with other persons or their property. Please observe all instruc tions and regulations.
Safety Instructions Bedeutung der Symbole Before snow clearing Read the user ma nual before setting into operation! Do not reach into rotating parts or into the discharge chute! Warning! Risk of injury if disregarded! Ensure adequate safety distance! Warning! Risk of injury from rotating parts! Keep objects away from the rotor! Keep third parties away from the danger area! Always wear sturdy footwear when using the device! Current conducting device.
• ATTENTION: Never reach into rotating parts! • The discharge chute must never point towards per sons or objects! • Switch the device off and remove the battery and safety key, if: - you leave, clean or handle the device or wish to adjust the discharge chute. - the rotor is blocked. - if the device has collided with an obstruction: Immediately check whether the device or rotor is damaged. If so, then first arrange to have it repai red.
Assembly 1. 2. 3.
4. Operating Instructions ACCU 450 5.
6. Assemble the discharge chute and fit the two seals precisely between the plastic parts. 26 7. Push the screws through the holes from the inside at both sides. ENGLISH 8. Secure the two screws with the knurled nuts and tighten them.
Startup 1. Fully charge the battery. Charging operation takes approx. 90 minutes. 3. 2.
4. Press the safety button and keep it depressed… 28 5. … while you pull the start lever towards yourself. ENGLISH 6. Now you can release the safety button.
Operation 7. Switch LED light on and off Operating Instructions ACCU 450 8. Swing discharge chute to the left 9.
Device shutdown/battery removal 2. Open the battery compartment and remove the safety key. 3. Remove the battery for charging or if the device is not used for a prolonged period. 1.
Battery care Servicing and storage: Observe LED display: • Keep the charger unit only in dry rooms. • Charge the battery in warm and dry rooms. • Protect the battery and char ger unit from the effects of the weather! red + green = battery charging 2x green = battery charged 2x red = battery/charger unit defective. Contact Support. • ATTENTION: Fully charge the battery at least 2–3x per year, so that it remains fully functional and no low discharge occurs.
Scraper blade exchange/spare parts 1. Make sure that the battery and safety key have been removed from the device before you handle it! Replacement scraper blade Artikel No. EAAK 450 EAN 9002766100483 3. Loosen the 4 screws on the bottom of the device. 2. You will require a replacement scraper blade and a crosshead screw driver. 4. Replace the used scraper blade with the new one. 5. Fix the scraper blade by screwing in and tightening the 4 screws. 32 ENGLISH Replacement battery Artikel No.
Technical data Snow clearing capacity: 150 m2 TIPS: Battery: 36V, 2,6Ah, Lithium-Ion battery Operating time: approx. 30 min./battery • Clearing just after snowfall makes the work easier Charging time: approx. 90 min. Snow clearing width: 450 mm Throwing distance: 4-5 m Throwing height: 3-5 m Noise emission: 82 dB Art. No.
Warranty You have the right to the statutory warranty period for your quality product. This is governed accor ding to the regulations valid in the respective countries. • Fully charge the battery immedia tely after purchase. • ATTENTION: Fully charge the battery at least 2–3x per year! So that it remains fully functional and no low discharge occurs. • TIP: If you leave the battery in the charger unit following the charging operation, the battery will not suffer any damage due to low discharge.
Service & Support Your satisfaction is particularly important to us! Warranty services Spare parts such as battery charger unit and scraper blades Technical inquiries Information about additional products Repair & Service Operating Instructions ACCU 450 Therefore please direct your con cerns in complete confidence to the Service-Center: Pospischil Tools GmbH Lütowgasse 12–14 1140 Wien, Austria Register your device … simply online at www.sonneck.com/service within 10 days of purchase.
