General Guidelines Please read the following instructions carefully and use the product accordingly. Please keep this manual and hand i over when you transfer the product. + This summary may not include every detail of all variations and considered steps. Please contact when further information and help are needed. Notes Personal injury and/or damage to the product may occur if products are used outside of their intended purposes and/or if products have been changed/modified from their original design.
Craw (3.5x40) Alt Bolt Bolt (M6x60) Bolt (M6x45) ac F Front Legs 2 B Seat 1 Front Leg Cross Beam 1 c Left armrest 1 H Rear Seat Slat 1 D Right armrest 1 E Vertical Back Support 2 *Note: DO NOT TIGHTEN ANY BOLTS BEFORE THE UNIT PUT TOGETHER.
Step 1 Attaching the rear seal slat Attach the rear seat slat (H) to the seat (B) with screws (AA) Step 2 Attaching the front legs Attach the front legs (F) onto the seat (B) with bolts(DD) Attach vertical back support (E) onto the seat (B) with bolts (EE) Pr-drilled i holes
Step 3 Attaching the armrest Attach the armrest (C&D) to the front legs (F) with bolts (DD) Step 4 Attaching the back Attach the back (A) to the seat (B) with bolts (BB) Attach the armrest to the vertical back support (E) with bolts (CC)
