General Guidelines ® Please read the following instructions carefully and use the product accordingly. Please keep this manual and hand it over when you transfer the product. ® This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.
Contents Package Contents 3 Preparation iii 4 Hardware Contents. 4 Assembly. 56 Operation. iii 7.
Preparation CAUTION: Do not use sharp tools to remove the protective material, as it may damage the product. Before assembling make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Tools required for Assembly: Wrench and Phillips-head screwdriver (not included) Hardware Contents GG el) Part Description Quantity GG Hex Bolt (M10 1.
Step 1: Place Lower Cross Leg (C) on the ground, line up notches and place Upper Cross Leg (D} over the Lower Cross Leg Step 2: Attach the Holder Pole (F) to the base by using the Bolts {GG} and Washers (HH), hand tighten only. Adjust the Holder Pole {F} to be sure it is positioned correctly on the base and finally tighten all bolts. Be careful not to over tighten.
Step 3: Place Blow Molded Base the cross bar assembly and fill with sand and water, cover with caps (M). Place Pole Support Cup (L} onto Holder Pole (F) and lay on top of Blow Molded Base (B). Step 4: Insert Umbrella Frame with Canopy (N) into the Holder Pole (F). Slide the holder pole collar onto the holder pole at the same time. Tighten the two Hex Bolts (JJ) into the holder pole to secure the umbrella.
Step 1: Unfasten the storage straps around the canopy Lever clamp Step 2: To open the umbrella, squeeze the Glide Handle and grip together and slide up or down the pole to achieve the desired tilting angle. Release the grip to lock into place. To open the canopy, turn the crank handle clockwise until the canopy is fully open.
Canopy position adjusting Rotates 360° Step 3: The multiple position canopy can rotate 360° around the axis of the main pole to offer the shade on your expected area around the umbrella. rs N \ 360° Step 4: To rotate umbrella, insert the crank handle (E} into holder pole (F) and turn to desired position.
Care and Maintenance Simply clean the umbrella canopy with a soft brush and mild detergent. Do not machine wash. Do not iron. Air dry the canopy thoroughly before storing for extended periods of time. Make sure the canopy is completely open during drying process to prevent shrinkage.
