Safety Instruction Safety Instruction Important Safety Instructions WARNING TO PREVENT FIRE OR SHOCK HAZARD. DO NOT USE AN EXTENSION CORD. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT FULLY INSERTED.
Safety Instruction Safety Instruction WARNING High voltages are used in the operation of this product. Do not remove the back cover of the cabinet. Refer servicing to qualified service personnel. CAUTION Do not place the main unit on an unstable cart stand, shelf or table. WARNING To prevent fire or electrical shock hazard, do not expose the main unit to rain or moisture.
Introduction Remote Control Thank you for purchasing this unit. Your unit will bring you years of high-quality viewing enjoyment. The television is easy to operate and provides an exceptionally high quality image. The manual will explain the operation of the unit, including its functions, features and other important features. Before installing or operating your unit, please take the time to thoroughly read this manual, particularly the sections on safety.
Remote Control for Smart TV Remote Control Function Remote Control for Smart TV Remote Control ESC Remote Control ESC Button Return to the previous menu under the Smart menu. Press to exit all OSD menu. F1 HOME Button To access the HOME page. F2 1. Connect 2.4G QT166 RF Dongle (Support signal reception of 360 degrees) to the USB port on the TV. CAPS Button Caps Lock button, switch between capital and lower case when inputting English character. F3 ANDROID MENU Button Press to display the menu.
Remote Control Function Main Unit Control RF Remote Control pairing Front Panel The Remote Control has been paired completely for your convenience. Users do not need to process this step again under normal condition, but if it does not work with battery fully charged or if you have replaced Remote Control or RF Dongle before operating you should follow the below steps for paring: STANDBY MENU SOURCE CH+ 1.
Main Unit Control Connection and Setup Rear Panel Connecting the Power Cord Connect the power cord directly to the wall outlet. ETHERNET 1 VGA 2 Y VGA AUDIO IN Pb Pr COMPONENT R - L - VIDEO ANT IN AV 1 IN USB Wall Outlet 1 R 14 L 13 8 7 VIDEO 12 6 SD/MMC AV OUT 11 R - L - VIDEO USB3.0 USB 10 5 4 4 3 (OPTICAL) DIGITAL AUDIO OUT 9 3 2 AV 2 IN 15 No.
Connection and Setup Connection and Setup Component Connection ETHERNET 1 VGA 2 Y VGA AUDIO IN Pb Pr COMPONENT R - L - VIDEO ANT IN AV 1 IN USB Component (YPbPr) Connection Y VGA AUDIO IN Pb Pr COMPONENT R - L - VIDEO USB Audio (AV) Cable (included) Back side of DVD player White Red Audio (AV) Cable (included) Yellow Blue Red Component Video Cable (included) Green ANT IN AV 1 IN Yellow VGA 2 Red 1 White ETHERNET Back side of DVD player DVD player DVD player AV IN
Connection and Setup Connection and Setup ANT IN Connection Precautions when using the USB device ETHERNET 1 VGA 2 Y VGA AUDIO IN Pb Pr COMPONENT R - L - VIDEO ANT IN AV 1 IN USB Connecting the USB Device Insert the USB directly to the unit. 1. Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. 1.
Smart TV Function Smart TV Function Accessing HOME menu Hot Key operation at HOME page Turning on the TV will automatically enter HOME menu, or you can either press HOME Button to access the HOME menu. Every time when you enter or return to the HOME page, you will see a “run” key at the bottom right corner of the current functional area which will disappear after flashing for 5 seconds. 1 3 1 2 5 4 2 HOME Button 3 6 HOME Button 8 4 7 5 9 No.
Smart TV Function Smart TV Function Network Connection The methods of setting up network settings: Remark: Network speed requirement is very important to this TV. Please keep network open, if there are any problems with your network connection please contact your internet provider or refer to router manual. Connecting to wired network Connect the TV to a local area network (LAN) via the LAN port as shown in the following illustration and set up the network settings.
Smart TV Function Smart TV Function Tips for Network Settings Use a standard LAN cable with a connector. Many network connection problems during set up can often be fixed by re-setting the router or modem. After connection to the home network, quickly power off and / or disconnect the power cable of the home network router or cable modem. Then power on and / or connect the power cable again.
Smart TV Function Smart TV Function Browser To open Browser click on HOME - > Browser Website can be entered by(keyboard on the Remote Control / keyboard on the TV screen / external keyboard), you can view the website on the TV. HOME Button Up or Down Buttons Note: When DEMO Mode is executed, please first press EXIT Button to exit then follow the above operation by going to Settings then enter Environment selection for closing.
Smart TV Function Smart TV Function Wi-Fi Hotspot 2. Click on the Login at the top of the HOME page, input e-mail and password to log in to visit the on-line shop. On-line apps can be downloaded through HOME - > Market - > Apps 2.1 Choose the application that you need from the list. 2.2 Check the related information about the application, select install. 2.3 The installed application will display at interface of ALL Apps, click one of them for running. 2.
Smart TV Function Smart TV Function Press OK Button to play or Exit to exit Music Playback Enter this function by HOME - > Media, then select your favourite song for playing. Press OK to play the music and Exit to exit playback. OK Button OK Button 1 3 2 5 4 7 6 9 8 10 2 1 No. 27 4 3 6 5 8 7 9 Description 1 Skip to the previous picture. 2 Click it to play or pause playback. 3 Skip to the next picture. 4 Zoom in the picture. 5 Zoom out the picture. 6 Right rotation.
Smart TV Function Smart TV Function Video Playback System Update Enter this function by HOME - > Media, then select your favourite video for playing. Press OK to play the video or Exit to exit. In order to enhance the network quality of the TV, regularly update the software from official website.
Smart TV Function Smart TV Function Manual Network update ATV Manual Tuning HOME - > Settings - > System update or restore Factory - > System local update - > Network Update to enter the interface of network update, then follow the steps of auto network updating as above. CHANNEL PICTURE SOUND OPTION TIME LOCK CHANNEL Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Local Update Select 1. Users need to download the related new software from our official website. 2.
Smart TV Function Smart TV Function B.DTV Manual Picture Menu CHANNEL CHANNEL DTV Manual Tuning Digital Scan Frequency ATV Manual Tuning Start Programme Edit strength Comfirm Exit Returm 1. Picture Mode: Press Left and Right to adjust the mode colour by Standard. Dynamic, User, Mild and 3D Mode. Contrast, Brightness, Color, Sharpness can be adjusted only under User mode, press MENU to return to the main menu.
Smart TV Function Smart TV Function Sound Menu Time Menu Press MENU Button to display the main menu. Press Left and Right to enter the SOUND page, it will highlight the first option, then press OK Button to enter the sub-menu. Press MENU Button to display the main menu. Use Up and Down to enter TIME page, it will highlight the first option. 1. Current Time: Can not be selected, but it can automatically obtain the network time. 2.
Smart TV Function OSD Menu Operation Lock Menu Precautions when using the USB device 1. Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. 2. Please use only USB storage devices that are formatted as a FAT32 file system , otherwise it may not be recognized. 3.
OSD Menu Operation Specification Pre-record 1. Press EPG on the remote to open the program guide, select the program that you want to record, then long press REC for three seconds to add the program to Pre-record list. 2. Press the green button on the remote to delete the selected recording group, yellow button to delete all the recording group. 3. You can also enter PVR settings by the method of :MENU OPTION MENU PVR SETTING SCHEDULED RECORD SETTING LIST.
Specification Specification Antenna Specification Problem The picture is not sharp. Suggested Action The reception may be weak. Change channels to confirm if the symptom is still present. Make sure the outside antenna is not disconnected. Make sure the antenna is facing the right direction. The picture is doubled or tripled. Make sure the antenna is facing the right direction. Picture ghosting is caused by reflections from buildings, large metal structures and mountains.
