User guide

15
Getting Started
4 Close Cover
Close the battery cover. Rotate the battery
cover screws in clockwise direction. You
can use the screwdriver provided to tighten
the screws. Ensure not to overtighten the
screws.
Removing the Battery
Follow steps 1 and 2 of “Inserting the Battery” on page
15.
To remove the battery, lift the cover behind the phone and
raise the upper end of the battery from the slot.
The battery can now be removed.
Follow step 4 of “Inserting the Battery” on page 15 to
close the cover.
Charging the Battery
The battery delivered with your mobile phone is not fully
charged. We recommend that you charge your mobile for
5 hours before you use your mobile phone for the rst
time.
The phone with a fully charged battery can
remain in the standby mode for a duration of
up to 800 hours. If the battery is completely
out of charge, it can take several minutes for
the charging icon to appear when the charger
is connected.
1 Insert Charger
Insert the charger plug into a power outlet.
2 Connect to Phone
The charger port is located on the
left side of the phone. To access
the charger port, lift the cover with
the USB sign. Insert the 3.5mm
jack/connector of the charger to
the port.
Alternatively, you can use the
adaptor provided in the phone
box to connect the phone to a
PC and charge the phone battery
using the standard USB cable.
3 Charging Animation
If the battery is being charged when
the phone is switched off,only the
battery icon is displayed (as
shown in the adjacent gure).
4 Charging Icon
If the battery is being charged while the
phone is switched on, you will notice that
the bars in the battery charge icon
(visible on the home screen) show
movement indicating that the battery
is being charged. After the phone is fully
charged the battery bars on the display
stop scrolling. You can disconnect the
charger from the phone.