User Guide

54
Tools
Stopwatch
Select Menu > Tools > Stopwatch.
1. To trigger the timer, select Start. The counter starts
running.
2. To temporarily stop the counter, select Pause.
3. To resume running the counter, select Go.
4. To stop the counter, select Stop.
Unit Converter
You can convert one type of physical units to another
type. Select Menu > Tools > Unit converter.
1. Select the type of physical unit. Use the Right or Left
navigation keys to scroll. For example, Temperature.
2. Scroll down and select the Unit 1 for Temperature, for
example, Fahrenheit.
3. Scroll down and enter the amount for Fahrenheit in
Amount 1, for example, 80.
4. Scroll down and select the Unit 2 for Temperature, for
example, Celsius.
5. The Temperature in Celsius is displayed in Amount 2.
Countdown Timer
This function is helpful when you need to be reminded of a
specic event or you want to time a particular task.
1. Select Menu > Tools > Countdown.
2. Specify the time for the reminder in terms of hours
and minutes. The maximum time you can set is 23
hours, 59 minutes and 59 minutes (23:59:59) and the
minimum is one second (00:00:01).
3. When the countdown is completed, the alarm rings.
GPS
The Global Positioning System (GPS) is a Global
Navigation Satellite System. It uses satellites that transmit
precise microwave signals, which enable GPS receivers to
determine their current location and time.
1. To enable GPS, select Menu > Tools > GPS > GPS
> On.
2. To set the time interval to receive the current location
and time, select Menu > Tools > GPS > Frequency
> select the time.
3. To enter the IP address of the instant x server from
which the related le will be received, select Menu
> Tools > GPS > Instant fix server > Instant fix
server > enter the IP address > Save.
4. To set the time interval to receive the le from the
server, select Menu > Tools > GPS > Instant fix
server > Frequency. Select the time.
If GPS is switched ON continuously,
the battery life will reduce.