User Guide

Hardcoded Shortcuts

Hardcoded shortcuts

The following is the list of hardcoded shortcuts.

• Press the green dial button From idle screen - Get the

All calls list.

• Enter 0 followed by SEND - releases all held calls or

sets User Determined User Busy (UDUB) for a waiting

call.

• Enter 1 followed by SEND - Releases all active calls (if

any exist) and accepts the other (held or waiting) call.

• Enter 1X followed by SEND - Releases a specic

active call X.

• Enter 2 followed by SEND - Places all active calls (if

any exists) on hold and accepts the other (held or

waiting) call.

• Enter 2X followed by SEND - Places all active calls on

hold except call X with which communication shall be

supported.

• Enter 3 followed by SEND - Adds a held call to the

conversation.

• Enter 4 followed by SEND - Connects two calls and

disconnects the subscriber from both calls (ECT).

• Enter 4 * “Directory Number” followed by SEND

- Redirects an incoming or a waiting call to the

specied directory number.

• Enter 5 followed by SEND - Activates the completion

of calls to busy subscriber request.

• Enter “Directory Number” followed by SEND - Places

all active calls (if any exists) on hold and sets up a

new call to the specied directory number.

• Enter END - Releases the subscriber from all calls

(except a possible waiting call).

• Press LEFT and RIGHT key in Outgoing/Answered/

Missed calls list - Allows to scroll between these 3

screens.

“X” is the numbering (starting with 1) of

the call given by the sequence of setting

up or receiving the calls (active, held or

waiting) as seen by the served subscriber.

Calls hold their number until they are

released. New calls take the lowest

available number.

Where both a held and a waiting call exist,

the above procedures shall apply to the

waiting call (that is, not to the held call) in

conicting situation.