User Guide

29
Your XP3 phone
 Attach GPRS: permits continuous GPRS connectivity
when the option Always attached is selected. Select
Attached during PDP session, if you want GPRS
connectivity only when required.
 Register again: allows you to register your phone to
a different network. This option works only when
Search Mode is set to Manual.
 Network account: is used to connect to the GSM or
GPRS network. Contact your service provider to
change the existing factory profiles and to acquire the
correct parameter updates. Connection errors are
caused due to wrong parameters. Certain predefined
profiles may be locked to prevent re-configuration.
The following options are dependent on your network
operator and the service you have requested.
1. On the Network account screen, choose a network
account and select Option > View > OK to view the
network account information.
2. Select Option > Edit > OK to modify the following
account information.
 Account name: allows you to rename the selected
network account.
 Bearer: allows you to choose from two protocols for
WAP service. You can either choose GSM only or GPRS
only. GPRS is required to access the WAP service.
 GSM settings: The following GSM settings can be
configured:
Data call type: choose between ISDN and Analogue.
Phone number: enter the number you need to dial.
When your phone connects to the Internet, it will dial
this number automatically.
User name: the user name required to log in to the
WAP server.
User password: the corresponding password that
enables you to log in to the WAP service.
 GPRS settings: configures the settings for APN
(Access Point Name - a requirement for GPRS), User
name and User password required to log in to the
WAP/data server.
 Search Mode: select Automatic to set the phone to
automatically select a cellular network available in your
area, or select Manual to set the network manually.