User Guide

Make calls

 Display cost: if enabled, displays the duration and

charges of the call. Disabled mode is the default mode.

 If you want to enable this function, you need to

acquire a PIN2 code from your network operator.

 Accum. charges: this service is only available when

your SIM card contains charging information. Use this

service to configure or view all charge information

related to your calls.

The following can be configured:

 Call tariff: displays the rate per call unit. This infor-

mation is stored in the SIM card. You can also reset

and set the rate.

Show cost Displays total charges of

all outgoing and incoming

calls since the last reset.

Reset charge count Resets the counter to

zero (protected by PIN2

code).

Show balance Displays available bal-

ance.

Show limit Displays maximum limit

available.

Cancel limit Cancels maximum limit

available on charges

(protected by PIN2

code).

Set limit Sets maximum limit for

charges (protected by

PIN2 code).



If the charges exceed the maximum limit,

you cannot make or receive calls. All

chargeable calls will be disconnected auto-

matically.