User Guide

56
The SMS messages are saved in Sent
messages , only if it is activated in Messages >
Message settings >Text message > Common
settings > Save sent message.
The MMS messages are saved in Sent
messages, only if it is activated in Messages >
Message settings > Multimedia message >
Common settings > Sending > Enable Send
and save option.
Archive
You can save the received or sent messages in the
archive folder. To archive a message, select Menu
> Messages > Inbox/Sent Messages > select the
message > select Move to Archive.
Email Messages
You can send, receive, and manage e-mail messages. To
access, select Menu > Messages > Email.
The E-mail account has to be congured, created
and activated to access the e-mail messages.
Configuring Email Accounts
You have to congure and create an e-mail account to
access the e-mail functionality.
1. To create an e-mail account Menu > Messages
> Email > A message appears Start to create
account? > Select Yes.
2. Select the specic pre-dened Email service
provider.
For Gmail, Yahoo, Hotmail pre-congured settings
are available. This can be accessed with just User
name & password.
3. Enter the e-mail address and password and select
OK.
If you get a certicate error, while retrieving or
sending email, complete the procedure provided
below, and install the new certicate.
Installing New Certicate
When certicate for an account is not installed in the
phone, you will get an error. You can install the required
certicate using the following steps.
1. In the certicate error screen, select Options or
press the center Menu key.
2. Select Install > OK.
3. Enter a certicate Label name in the editor.
Certicate label is a unique user-dened name for
the new certicate. You can enter any name, to
identify the certicate, easily.
Example: yahoocert1
4. Select Options > Done.
Certicate imported message is displayed, once
the certicate is installed successfully.
If you want to create other Email accounts,
1. Select Other Email accounts.
2. Enter the e-mail address and select Options > Next.
3. Select a protocol and select Options > Next.
Managing Messages