User manual

YOUR SIM/SD CARD

INSERTING THE SIM CARDS

To access the SIM Card slots, use your Sonim

screwdriver to remove the battery door screw and then

remove the battery. The SIM card slots will be found

under the battery.

1. UNSCREW COVER

Use the Sonim screwdriver

provided in your box to

unscrew the battery cover

on the back of the phone.

2. REMOVE THE COVER

AND THE BATTERY

From the back of the

phone, insert your ngernail

into the back removal

notches at the bottom left

and right corner and gently

pull up to remove the back

cover.

Take the battery out.

3. OPEN THE SILVER

CLIPS

Slide (push to the left side)

and lift the silver clips over

the SIM slots.

4. INSERT SIM CARDS

Select the SIM card tray

in use. Insert the new SIM

card into the silver clip.

Close the silver clip by

sliding it to the right until

you hear a click to lock it

in place.

SIM 1

SIM 2

SIM CARD

The SIM (Subscribert Identity Module) card associates

your network services (for example, phone number, data

services, etc.) with your phone. The Sonim XP10 device

comes with Dual SIM card and Memory card trays.

Note: The XP10 does have two SIM slots and a SIM can

be inserted in either SIM slot. Due to carrier restrictions,

when two SIMs are present, only the SIM card in Slot 1 is

active.