User's Manual
Table Of Contents
- General Information
- Options Commonly Used Across Menu Items
- Your Safety Guidelines
- Personal Medical Devices
- Battery Disposal
- Avoid High Temperatures
- Avoid Short Circuit
- Battery Replacement
- Battery Performance
- SAR Information
- Emergency Calls
- Child Safety
- Getting Started
- Inserting the SIM/Memory card
- Your SIM Card
- Low Battery Alert
- Removing the SIM/Memory card
- Operations in Home Screen
- Home screen
- Basic Settings
- Keypad Functions
- Your Sonim XP2.10 SPIRIT Phone
- Key Operations Without Your SIM Card
- Phone Settings
- Phone Profiles
- Security Settings
- Power Saving
- Display Settings
- Data Profiles
- Network Settings
- Clear All
- Reset Settings
- Managing Calls
- Call Forwarding
- Any Key Answer
- Accept/Reject a call
- Speed Dial
- Fixed Number Dialing
- Call Barring
- The Call forward options are mentioned below:
- Other Call Settings
- Headset Auto Answer
- Auto Redial
- Caller ID
- Call Waiting
- Managing Contacts
- Copy or Move Numbers between Phone, SIM
- Delete Contacts
- Sending Contact
- Default Contact List
- Other Numbers
- Searching Contacts
60
Memory card
Memory Card
In Sonim XP2.10 SPIRIT phone, you can insert a
removable Micro SD Card to increase the storage
capacity. This card is inserted into the slot below the
battery. You can perform the following functions on the SD
card.
• Formatting of the SD card.
• Viewing available space.
• Setting the images in the SD card as wallpaper.
• Setting the audio les in the SD card as ringtones.
The maximum capacity supported is upto 4
GB.
Inserting Memory card Into the Phone
1. Ensure the phone is switched off.
2. Lift the battery cover and remove the battery. For
instructions refer “Inserting the Battery” on page 13.
3. Lift the silver clip over the designated slot located at
the top left end of the battery slot.
4. Place the SD card in the designated slot and close
the silver clip.
5. Replace the battery and the cover. Turn the battery
cover screws clockwise to lock the battery cover.
When the phone is connected to a computer
using USB, the Memory card is displayed as a
separate drive in the computer.