User's Manual
Table Of Contents
- General Information
- Options Commonly Used Across Menu Items
- Your Safety Guidelines
- Personal Medical Devices
- Battery Disposal
- Avoid High Temperatures
- Avoid Short Circuit
- Battery Replacement
- Battery Performance
- SAR Information
- Emergency Calls
- Child Safety
- Getting Started
- Inserting the SIM/Memory card
- Your SIM Card
- Low Battery Alert
- Removing the SIM/Memory card
- Operations in Home Screen
- Home screen
- Basic Settings
- Keypad Functions
- Your Sonim XP2.10 SPIRIT Phone
- Key Operations Without Your SIM Card
- Phone Settings
- Phone Profiles
- Security Settings
- Power Saving
- Display Settings
- Data Profiles
- Network Settings
- Clear All
- Reset Settings
- Managing Calls
- Call Forwarding
- Any Key Answer
- Accept/Reject a call
- Speed Dial
- Fixed Number Dialing
- Call Barring
- The Call forward options are mentioned below:
- Other Call Settings
- Headset Auto Answer
- Auto Redial
- Caller ID
- Call Waiting
- Managing Contacts
- Copy or Move Numbers between Phone, SIM
- Delete Contacts
- Sending Contact
- Default Contact List
- Other Numbers
- Searching Contacts
20
Getting Started
Basic Settings
When you have switched on your phone the name of the
service provider is displayed.
Security Settings
To prevent unauthorised use of your phone, you can set a
PIN code. The PIN is operator dependent.
1. Select Menu > Settings > Security > PIN activate
> Activate. Enter the PIN. Select OK. After this is
set, every time you power on the phone, you will be
requested to enter the PIN. If the PIN code is wrong
you cannot access the phone.
2. To change the PIN code select Menu > Settings >
> Security > Change Pin. You can change codes
for PIN and PIN2. Contact your service provider for
details.
Privacy Guard
In the privacy guard mode, the Call list, Contacts,
messages and Speed dial can be accessed only by
entering a password.
To enter the safeguard password, select Menu > Settings
> Security > Privacy Guard. Select Protected Items and
enter the password. After entering the password, the
Protected Items screen is displayed. Mark the required
features and safeguarded and select OK.
The default password for privacy guard is 1234.
Phonelock Mode
In the phonelock mode, the phone can be unlocked only
by entering a password.
To enter the phonelock password, select Menu > Settings
> Security > Phonelock. Enter the password. Select OK.
The default password for phonelock is 1234..
To change the safeguard or phonelock
password, select Menu > Settings >
Security > Change security code. Enter
the password. Select OK. Enter the new
password. Select OK. Reenter the new
password. Select OK.
Auto Keypad Lock
To lock the keypad, select Menu > Settings > Phone >
Auto key lock. You can choose to switch it off or enable
the feature by setting time.
Alternatively press and hold the ‘*’ key to lock the keypad.
To unlock, press * > OK.
Date and Time
To set the Date and Time, select Menu > Settings >
Phone >Time and Date.
Meeting Mode
In the meeting mode, the alerts for Calls, Organizer, SMS
and battery status are disabled.
Select Menu > Settings > Phone Profiles > Meeting
Mode OR press and hold the # key.