User's Manual

13
Getting Started
Battery Usage
• Use only a Sonim XP2.10 SPIRIT certied battery that
is designed for this phone model.
• The use of other batteries may void the warranty
terms of your phone and cause damage.
• It is recommended to protect the battery from
extreme temperature environments and moisture.
• Please keep the battery out of the reach of children.
Inserting the Battery
1 Unscrew Cover
To open the battery cover,
rotate both the battery cover
screws in an anti-clockwise
direction. You can use the
screwdriver provided to open
the screws.
2 Lift Cover
Lift the back cover from both
sides to reveal the battery slot.
3 Insert Battery
Insert the battery and ush into
the battery slot such that the
three metallic contacts at the
top of the battery are aligned
with the metallic contacts within
the battery compartment.
4 Close Cover
Close the battery cover. Rotate
the battery cover screws in
clockwise direction. You can
use the screwdriver provided to
tighten the screws.
Removing the Battery
Follow steps 1 and 2 of “Inserting the Battery” on page 13.
To remove the battery, lift the cover behind the phone and
raise the upper end of the battery from the slot.
The battery can now be removed. Follow step 4 of
“Inserting the Battery” on page 13 to close the cover.
Charging the Battery
The battery delivered with your mobile phone is not fully
charged. We recommend that you charge your phone fully,
before you use your mobile phone for the rst time.