User's Manual
Table Of Contents
- General Information
- Options commonly used across menu items
- Phone Models Covered
- Your Safety Guidelines
- Battery Disposal
- Avoid High Temperatures
- Avoid Short Circuit
- Battery Replacement
- Battery Performance
- Personal Medical Devices
- SAR Certification
- Emergency Calls
- Child Safety
- Getting Started
- Inserting the SIM card
- Your SIM Card
- Set Battery Alert
- Removing the SIM card
- Operations in Home Screen
- Home screen
- Basic Settings
- Keypad Functions
- Your XP3.20 Phone
- Key Operations Without Your SIM Card
- Phone Settings
- Display Settings
- Connectivity Settings
- Sounds Settings
- Calls
- Any Key Answer
- Receive a call
- Speed Dial
- Fixed Number Dialing
- Call Barring
- Call Forwarding
- Filter Calls
- Auto Answer
- Auto Redial
- Call Waiting
- Recording a Call
- Review Call Cost Information
- Other Call Settings
- Add to Black list
- Managing Contacts
- Sending Contact
- Default Contact Location
- Default Contact List
- Adding a Contact to Whitelist
- Adding a Contact to Blacklist
- Copy or Move Numbers to Other Lists
- Delete Contacts
47
Hardcoded Shortcuts
Hardcoded shortcuts
The following is the list of hardcoded shortcuts.
• Press the green dial button From idle screen - Get the
All calls list.
• Enter 0 followed by SEND - releases all held calls or
sets User Determined User Busy (UDUB) for a waiting
call.
• Enter 1 followed by SEND - Releases all active calls (if
any exist) and accepts the other (held or waiting) call.
• Enter 1X followed by SEND - Releases a specic
active call X.
• Enter 2 followed by SEND - Places all active calls (if
any exists) on hold and accepts the other (held or
waiting) call.
• Enter 2X followed by SEND - Places all active calls on
hold except call X with which communication shall be
supported.
• Enter 3 followed by SEND - Adds a held call to the
conversation.
• Enter 4 followed by SEND - Connects two calls and
disconnects the subscriber from both calls (ECT).
• Enter 4 * “Directory Number” followed by SEND
- Redirects an incoming or a waiting call to the
specied directory number.
• Enter 5 followed by SEND - Activates the completion
of calls to busy subscriber request.
• Enter “Directory Number” followed by SEND - Places
all active calls (if any exists) on hold and sets up a
new call to the specied directory number.
• Enter END - Releases the subscriber from all calls
(except a possible waiting call).
• Press LEFT and RIGHT key in Outgoing/Answered/
Missed calls list - Allows to scroll between these 3
screens.
“X” is the numbering (starting with 1) of
the call given by the sequence of setting
up or receiving the calls (active, held or
waiting) as seen by the served subscriber.
Calls hold their number until they are
released. New calls take the lowest
available number.
Where both a held and a waiting call exist,
the above procedures shall apply to the
waiting call (that is, not to the held call) in
conicting situation.