User Manual

ManualsBrandsSonim Technologies ManualsCell PhonesA modular Near Field Communications battery cover accessary designed to be used with Sonim mobile phones.

Confidential NFC BCA Integration Guide

NFC BCA Integration Guide

Function:

Status:

Draft

Author:

Sonim

Version:

1.0

Filename:

Revision History

Version

Name

Date

Remarks

1.0

Vallabh

1.1

Vallabh

19 Nov 2011

Revised with comments from Sabrina

This Sonim document has been submitted under terms of our Non-Disclosure Agreement. It is not for

use by any other persons. It may not be reproduced, stored, or copied in any form. By accepting

delivery of this summary, the recipient acknowledges and agrees that: I) in the event the recipient does

not wish to pursue this matter, the recipient will return this copy to Sonim technologies, Inc., at the

address listed below as soon as practical; or delete files containing this plan that were sent via

electronic mail; ii) the recipient will not copy, fax, reproduce, or distribute this Proposal, in whole or in

part, without permission; iii) all of the information contained herein will be treated as strictly confidential

material.

Summary of content (5 pages)

PAGE 1
Confidential NFC BCA Integration Guide NFC BCA Integration Guide Function: Author: Filename: Status: Version: Sonim Draft 1.0 Revision History Version Name 1.0 Vallabh 1.1 Vallabh Date 19 Nov 2011 Remarks Revised with comments from Sabrina This Sonim document has been submitted under terms of our Non-Disclosure Agreement. It is not for use by any other persons. It may not be reproduced, stored, or copied in any form.
PAGE 2
Confidential NFC BCA Integration Guide 1. Introduction Sonim NFC BCA has a NFC chipset based circuitry with a proprietary bus interface designed for using with the Sonim mobile phones. The NFC BCA has been designed and tested with phone models having the corresponding bus connector interface only. The Sonim NFC BCA is primarily targeted for reader mode deployments.
PAGE 3
Confidential 1.1 NFC BCA Integration Guide Sample NFC BCA Pictures 2. Integration Test Procedure 2.1 Initialization The user must power cycle the phone after connecting the battery cover. This is a mandatory requirement for the NFC to function properly. The user must launch the NFC Test application on the phone. If the application launches successfully – it indicates that the phone has successfully initialized the NFC module on the BCA and ready for actual NFC based operations.
PAGE 4
Confidential 2.2 NFC BCA Integration Guide Reader mode The NFC test application initializes the phone as reader. On launching successfully, the phone is ready to read NFC ISO 14443 compliant tags. Hold the phone with the NFC BCA at a distance less than 3 cm in order to activate the read operation. The NFC application must now read the NFC tag successfully and show the properties of the NFC tag – within three seconds. This confirms the NFC integration on the phone.
PAGE 5
Confidential NFC BCA Integration Guide 3. Usage Information Based on tests performed on a reference Sonim product (Sonim XP1301 Core), it is inferred that the usage of the NFC BCA integrated on any supported Sonim product can be used by end customers safely. The NFC BCA device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.