Manual
Table Of Contents
- Fig A: Packing List
- Fig B: Power Connections
- Fig C: Mains Lead Table
- Fig 1-1: RB-2S4 Reference Monitor Front Panel
- Fig 1-2: RB-2S10 Reference Monitor Front Panel
- Fig 1-3: Reference Monitor Block Diagram
- Fig 1-4: RM-2S4 Front Panel Controls
- Fig 1-5: RM-2S10 Front Panel Controls
- Fig 1-6: RM-2S4 Source Selector
- Fig 1-7: RM-2S10 Source Selector
- Fig 1-8: RM-2S4 & RM-2S10 Meters
- Fig 1-9: RM-2S4 & RM-2S10 DIPSwitch Settings
- Fig 1-10: Meter Labelling Options
- Fig 1-11: Brightness Control
- Fig 1-13: Balance Control
- Fig 1-12: Phase Meter Display
- Fig 1-14: Status LEDs
- Fig 1-15: RB-2S4 & RB-2S10 Modifier Switches
- Fig 1-16: Reference Monitor RM-2S4 Rear
- Fig 1-17: Reference Monitor RM-2S10 Rear
- Fig 1-18: RM-2S4 & RM-2S10 DIPswitch Settings
- Fig 2-1: RB-4C8 Reference Monitor Front Panel
- Fig 2-2: Reference Monitor Block Diagram
- Fig 2-3: RM-4C8 Front Panel Controls
- Fig 2-4: RM-4C8 Rotary Source Selectors
- Fig 2-5: RM-4C8 Meters
- Fig 2-6: RM-4C8 DIPSwitch Settings
- Fig 2-7: Meter Labelling Options
- Fig 2-8: Brightness Control
- Fig 2-9: Phase Meter Display
- Fig 2-10: Balance Control
- Fig 2-11: Status LEDs
- Fig 2-12: RB-4C8 Modifier Switches
- Fig 2-13: Reference Monitor RM-4C8 Rear
- Fig 3-1: RM-HD1 Expansion Card
- Fig 3-2: RM-HDE1 Expansion Card
- Fig 3-3: Reference Monitor RM-HD(E)1 Block Diagram
- Warranty
- Safety Information
- Installation Information
- Reference Monitors Introduction
- RM-2S4 Reference Monitor, 2 LED meters & 4 stereo
- channel inputs
- RM-2S10 Reference Monitor, 2 LED meters & 10 stereo
- channel inputs
- Technical Specification RM-2S4 & RM-2S10
- RB-4C8 Reference Monitor, 4 LED meters, 8 channel inputs &
- dual selectors
- Technical Specification RM-4C8
- RM-HD1 Reference Monitor HD-SDI Expansion Card &
- RM-HDE1 Reference Monitor HD-SDI & Dolby E Expansion Card
- Technical Specification RM-HD1 & RM-HDE1
- Serial Interface Commands & Responses Protocol
46
Reference Monitors User Handbook
REFERENCE MONITORS RM-4C8
2
REFERENCE MONITORS RM-HD(E)1
46
Reference Monitors User Handbook
REFERENCE MONITORS RM-HD(E)1
3
RM-HD1 Reference Monitor HD-SDI Expansion Card &
RM-HDE1 Reference Monitor HD-SDI & Dolby E Expansion Card
These expansion boards for the Sonifex Reference Monitor allow the monitoring of
embedded audio channels within an SD/HD-SDI video signal. The embedded audio can be
either non-encoded linear PCM (RM-HD1), Dolby E Decoder or Dolby Digital Decoder
(RM-HDE1) depending on which card is used.
The expansion board can extract two AES/EBU groups (4 stereo pairs) from the video
signal and pass them to the main Reference Monitor unit for monitoring. The input is
autosensing for either SD or HD input formats and the extraction of embedded audio
complies with SMPTE-272 (SD) and SMPTE-299 (HD).
The SDI input is equalized, internally reclocked and re-transmitted via the SD/HD-SDI
output to provide a reclocked output to pass to external equipment such as another
reference monitor.
Fig 3-1: RM-HD1 Expansion Card
Fig 3-2: RM-HDE1 Expansion Card